R037CH Chrome Rounded Wall Mounted Hinge - Split Back Plate - Pinnacle 037 P1N037CH Series

Colors Available:

(other colors available by quote)

Our BB Hardware R037CH BBAHI Paris Chrome Beveled Wall Mounted Split Back Plate Hinges are similar to our popular Geneva Series Hinge, but with one design change: BB Hardware (Pinnacle Style) has radius corners and beveled edges for a sleek appearance. Pinnacle Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15 degree of the closed position. Pinnacle Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. The Pinnacle Hinge also contains the same Reversible 5 degree Pivot Pin featured in our Geneva, Cathedral, Roman, Ultimate, and Elite Series Hinges. A Custom Pivot Pin is also available for "off-angle" installations.

Shower Door Hinges are designed for residential or hotel hardware">shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the BB Hardware Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for BB Hardware hinges may not match those of other brands.

Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Three Year Warranty
Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position)
Use Monolithic Tempered Glass
Height: 3-1/2" (89 mm)
Width: 2-3/16" (56 mm)

STANDARD REVERSIBLE PIVOT PIN: Each BB Hardware (Pinnacle Style) Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Pinnacle Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into hardware">shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" to 1/2" (8 to 12 mm) Tempered Safety Glass

Special Feature: Wall Mount Hinges and 180 degree Glass-to-Glass Hinge offer a choice of a Standard Model, factory set at standard closing position (0 degree), or a 5 degree Pre-Set Model for tighter closure into hardware">shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree out

Closing Type: Self-Centering when within 15 degree of closed position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. P1N13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Custom finishes are available on request.

CRL Pinnacle P1N037CH Series

FHC Preston PRESF1CH Series

Please login or register to review

Reviews Over R037CH BBAHI Paris Chrome Beveled Wall Mounted Split Back Plate Hinge

Average Rating:

Total Reviews (0)
click here write review to add review for this product.

R037CH Chrome Rounded Wall Mounted Hinge - Split Back Plate - Pinnacle 037 P1N037CH Series

Brand: BBHardware
Product Code: R037CH
Availability: In Stock

Related Products

D6CH Chrome 6" Tubular Back-to-Back Pull Handle - BM6X6CH Series

The BB Hardware (BM Style) of Back-to-Back Tubular Pull Handles with Metal Washers are constructed of 1.5 mil thick heavy brass tubing. Decorative met..

D818CH Chrome Combo Tubular 8" Tubular Pull Handle 18" Towel Bar - BM8X18CH Series

The BB Hardware (BM Style) of Pull Handle/Towel Bar Combinations With Metal Washers are provided with all the hardware required for installation. They..

BU4CH Chrome Square Style Notch-in-Glass Fixed Panel U-Clamp - BCU4CH Series

BB Hardware "Beveled Wall Mount BU4 Series" Clamps (Hole-in-Glass Style) mount directly to the wall, ceiling or floor to secure vertical fixed glass p..

KN16CH Chrome Contemporary Back to Back Knobs - SDK106CH Series

Solid brass BB Hardware "SDK106 Contemporary Style" Knobs come in several beautiful finishes. Knobs measure 1-3/16" (30 mm) in diameter and stand 1-3/..

S818CH Chrome Combo 8" Square Tubular Pull Handle 18" Towel Bar - SQ8X18CH Series

Part of the BB Hardware "SQ Style" Square Line of Accessories Featuring the Same Mitered Corners as Our Handles and Towel Bars. BBHardware "SQ Style" ..

S037CH BBAHI Georgian Chrome Square Wall Mounted Split Back Plate Hinge

Downloadable PDF: Template-DimensionsColors Available:Brushed NickelPolished BrassChromeMatte BlackSatin Brass(other colors available by qu..

C33CH Chrome Square Style Fixed Panel Clamp With Leg - SGC037CH Series

The C33CH Chrome Square Style Fixed Panel Clamp With Leg - SGC037CH Series Leg mounts directly to the wall, ceiling or floor to secure vertical fixed ..

U77CH Chrome Traditional Style Fixed Panel U-Clamp - UC77CH Series

BBHardware Standard Fixed Panel U-Clamps mount directly to the wall, ceiling or floor to secure vertical fixed glass panels. Clearance between the gla..

S618CH Chrome Combo 6" Square Tubular Pull Handle 18" Towel Bar - SQ6X18CH Series

Part of the BB Hardware "SQ Style" Square Line of Accessories Featuring the Same Mitered Corners as Our Handles and Towel Bars. BBHardware "SQ Style" ..

D1818CH Chrome Tubular 18" Back to Back Towel Bar - BM18X18CH Series

The BB Hardware BM Series of Back-to-Back Towel Bars with Metal Washers are constructed of 1.5 mil thick heavy brass tubing. Decorative metal back-up ..

D618CH Chrome Combo Tubular 6" Tubular Pull Handle 18" Towel Bar - BM6X18CH TBR6X18CH Series

The BB Hardware (BM Style) of Pull Handle/Towel Bar Combinations With Metal Washers are provided with all the hardware required for installation. They..

P1CH BBAHI Porto Series Chrome Rounded Pivot Hinge - Top or Bottom Mount - CRL Prima - FHC Patriot Series

Our P1CH BBAHI Porto Series Chrome Rounded Pivot Hinge - Top or Bottom Mounts are designed for use with 5/16" to 3/8" (8 to 10 mm) tempered ..

P2CH BBAHI Porto Series Chrome Rounded Pivot Hinge - Glass-to-Glass Mount - CRL Prima - FHC Patriot Series

Our P2CH BBAHI Porto Series Chrome Rounded Pivot Glass-to-Glass Mount Hinges (CRL Prima - FHC Patriot Series) are designed for use with 5/16..

V037CH BBAHI Vennice Series Chrome Square Heavy Duty Wall Mounted Full Back Plate Hinge

Downloadable PDF: Template-DimensionsColors available:Brushed NickelPolished BrassChromeMatte BlackSatin Brass(other colors available by qu..

D6CHAM Anti Microbial Chrome 6" Tubular Back-to-Back Pull Handle - BM6X6CH Series

The BB Hardware (BM Style) of Back-to-Back Tubular Pull Handles with Metal Washers are constructed of 1.5 mil thick heavy brass tubing. Decorative met..

C135CH Chrome Square Style 135 Degree Fixed Glass to Glass Clamp - SGC135CH CSU135CH Series

Our BBAHI C135CH Chrome Square Style 135 Degree Fixed Glass to Glass Clamps - SGC135CH CSU135CH Series have sharp corners. The glass can be ..

C135PN Polished Nickel Square Style 135 Degree Fixed Glass to Glass Clamp - SGC135PN CSU135PN Series

Our BBAHI C135PN Polished Nickel Square Style 135 Degree Fixed Glass to Glass Clamps - SGC135BN CSU135BN Series have sharp corners. The glas..

C335CH Chrome Square Style 135 Degree Moveable Transom Glass to Glass Clamp - SGC135CH Series

Moveable Transom Glass to Glass ClampFor 5/16" to 1/2" (8 to 12 mm) GlassUsed to Secure Fixed Panels of Glass for Frameless Shower EnclosuresSolid Bra..

C335PN Polished Nickel Square Style 135 Degree Moveable Transom Glass to Glass Clamp - SGC135PN Series

Moveable Transom Glass to Glass ClampFor 5/16" to 1/2" (8 to 12 mm) GlassUsed to Secure Fixed Panels of Glass for Frameless Shower EnclosuresSolid Bra..

S037SB BBAHI Georgian Satin Brass Square Wall Mounted Split Back Plate Hinge

Downloadable PDF: Template-DimensionsColors Available:Brushed NickelPolished BrassChromeMatte BlackSatin Brass(other colors available by qu..

S037BR BBAHI Georgian Polished Brass Nickel Square Wall Mounted Split Back Plate Hinge

Downloadable PDF: Template-DimensionsColors Available:Brushed NickelPolished BrassChromeMatte BlackSatin Brass(other colors available by qu..

S618BR Brass Combo 6" Square Tubular Pull Handle 18" Towel Bar - SQ6X18BR Series

Part of the BB Hardware "SQ Style" Square Line of Accessories Featuring the Same Mitered Corners as Our Handles and Towel Bars. BBHardware "SQ Style" ..

S618ORB Oil Rubbed Bronze Combo 6" Square Tubular Pull Handle 18" Towel Bar - SQ6X180RB Series

Part of the BB Hardware "SQ Style" Square Line of Accessories Featuring the Same Mitered Corners as Our Handles and Towel Bars. BBHardware "SQ Style" ..

S618PN Polished Nickel Combo 6" Square Tubular Pull Handle 18" Towel Bar - SQ6X18PN Series

Part of the BB Hardware "SQ Style" Square Line of Accessories Featuring the Same Mitered Corners as Our Handles and Towel Bars. BBHardware "SQ Style" ..

SFP037CH Chrome Square Wall Mounted Hinge - Full Back Plate - Geneva GEN037CH Series

The BB Hardware (Geneva Style) of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design ..

D6SB Satin Brass 6" Tubular Back-to-Back Pull Handle - BM6X6SB Series

The BB Hardware (BM Style) of Back-to-Back Tubular Pull Handles with Metal Washers are constructed of 1.5 mil thick heavy brass tubing. Decorative met..

D8SB Satin Brass 8" Tubular Back-to-Back Pull Handle - BM8X8SB PHR8X8SB Series

The BB Hardware (BM Style) of Back-to-Back Tubular Pull Handles with Metal Washers are constructed of 1.5 mil thick heavy brass tubing. Decorative met..

PS037CH Chrome "Premium" Square Wall Mounted Hinge - Split Back Plate with Reversible Pin - CRL Geneva GEN037 - FHC-USA Glendale GLENF1 Series

Downloadable PDF: Template-DimensionsNEW Premium "Split Back Plate" BB Hardware (Geneva Style) of professional Hinges is able to ..

D618SB Satin Brass Combo Tubular 6" Tubular Pull Handle 18" Towel Bar - BM6X18SB TBR6X18SB Series