Downloadable PDF: Template-Dimensions
Our V074CH Chrome Square Wall Mounted Hinge - Short Back Plate - Vienna V1E074 Venice VENS2 Type Hinge is the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting hardware">shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the BBHardware (Vienna Style) Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs.
Shower Door Hinges are designed for residential or hotel hardware">shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the BBHardware Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for BBHardware hinges may not match those of other brands.
- Accommodates 3/8" to 1/2" (10 to 12 mm) Glass
- 3 Year Warranty
- Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position)
- Use Monolithic Tempered Glass
- Height: 3-15/16" (100 mm)
- Width: 2-1/4" (57 mm)
STANDARD REVERSIBLE PIVOT PIN: Each BBHardware (Vienna Style) Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard BBHardware (Vienna Style) Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into hardware">shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).
Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).
Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm).
Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass
Construction: Solid Brass
Hinge Swings: 90 degree In and 90 degree Out
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out Required - Except V1E092 which Requires Cut-Out for Door and Two Holes for Fixed Panel
Includes: Gaskets, Screws, and Glass Fabrication Dimensions
Custom finishes are available on request.
CRL (C.R. Laurence) Vienna V1E074 Type
FHC (Frameless Hardware Co) Venice VENS2 Type
V074BN Brushed Nickel Square Wall Mounted Hinge - Short Back Plate - Vienna V1E074 Venice VENS2 Type
- Brand: BBHardware
- Product Code: V074BN
- Availability: In Stock
Tags: V074CH Chrome Square Wall Mounted Hinge - Short Back Plate - Vienna V1E074 Venice VENS2 Type Square, Heavy Duty, Wall Mounted Hinges, Full Back Plate, frameless shower door hardware, venice, c.r. laurence, crl, fhc-usa, heavy duty glass shower door hinges, shower tub hardware, heavy duty glass shower door hinges, hinged shower panel, shower tub hardware, hinges for shower enclosures, wall hinges